This robot kit uses the NodeMCU 1.0 board as the robot controller. Inside the board is a ESP8266 module, which has a 32-bit microcontroller IC, 4MB of flash memory and a WiFi module as well. Made it possible to send and receive data or command control of various devices such as the operation of robot control, switch on and off of tubes, and control watering of plants, etc. In addition, the NodeMCU 1.0 board also has a CP2102 IC for converting USB signals to UART, for use in connection with a computer for loading the driver we wrote. Users can write control programs through Arduino IDE or LUA programming with the aforementioned features. Therefore, it can be developed to order work through the Internet. Or as we can call it the Internet of Things (IoT). Besides that, users have learned how to write driver programs. Also learn about mechanics such as the operation of gear motors, learn how to create applications to control robots, and learn the operation of electronic circuits. Technical data Power supply : 6VDC. Electric current consumption : 500mA. Applications can be used on mobile phone to control robot via Wi-Fi. There are 3 LEDs for display. Applications made available on ANDROID mobile phones up to version 10. IC board dimension : 2.54 in x 3.09 in. Body dimension (WxLxH) : 120 x 130 x 70 mm. Weight (batteries not included) : 195g. Use a 2WD drive system. The robot body uses ABS plastic. Use all 2 gear motors. Features of geared motors used : 1.Voltage size: 3-6VDC, 120mA@6VDC (without load). 2.Maximum speed of gear motor (without load) : 120-240rpm/min. 3.Gear Ratio : 1:48.